Mobility
Briefing

CBMM challenge

01 May 2019
USP

The goal is to engage the consumer by providing a test drive experience, along with providing relevant information about Niobium.


Formula E
Briefing (PDF 2.52 MB)
Mobility Formula E Formula E - Berlin Lucas di Grassi
Related Content
Mobility
Technical Briefing
Niobium adding value to PHS for the automotive industry
Bruning Tecnometal, SSAB and CBMM, global leader of production and commercialization of Niobium products, joined forces in a project aiming the development of a 1500 MPa Press Hardening Steels (PHS) that would allow designers to develop stamped parts with greater thickness primarily for heavy-duty applications, but also suitable for other type of vehicles. The use of Niobium was key to achieving the refining of microstructural grains and a more homogeneous martensite structure after the hot stamping process.
More
Mobility
Tech Talk
Grain refinement of Al-Si alloys by Nb-B inoculation
The Charles Hatchett Award is important to identify new applications and markets for Niobium. Introduced over 40 years ago, the Charles Hatchett Award is sponsored by CBMM Niobium and recognizes the best published research on the science and technology of Niobium. The annual award brings together technical experts from around the world and the winning paper is selected by a panel of international experts. This Charles Hatchett Award 2016 winners video introduces the research on the grain refinement of Al-Si Alloys by Nb-B inoculation, including concept development and its effect on binary alloys and subsequent application in commercial Aluminum alloys.
More
Mobility
Technical Paper
New ferritic stainless steel for service temperatures up to 1050 ◦C utilizing intermetallic phase transformation
Sag tests at high temperatures for the designed steel showed significantly better results compared to other ferritic stainless steels typically used in high temperature applications at present.
More
Mobility
Technical Paper
Corrosion behavior and conductivity of TiNb and TiNbN coated steel for metallic bipolar plates
X-ray diffraction (XRD) measurements confirmed the existence of metallic nitrides in the TiNbN coating. Scanning electron microscope (SEM) tests showed that the deposited coatings provided smooth surfaces
More